Werbung
Verfügbare Sprachen
Verfügbare Sprachen
E
n
g
l
i
s
h
1
Congratulations on your purchase of a Speedrite battery powered electric fence energizer. This product uses the latest technology to give superior
performance and many years of service.
Please read the instructions carefully to ensure maximum safety, performance and reliability of the Speedrite electric fence energizer.
WARNING:
•
Risk of electric shock.
•
Do not connect the energizer to a mains/line supply. The energizer must be connected to a battery.
Parts of the energizer
Explanation of symbols that may be on the energizer
To reduce the risk of electric shock, the energizer should only be opened and/or repaired by qualified Speedrite appointed personnel.
Read full instructions before use.
This battery energizer is intended for connection to a 9 V battery.
This battery energizer must not be connected to a battery while the battery is being charged by a mains /line supply operated charger. Do
not connect the energizer or the battery wiring to any mains/line supply operated equipment.
Installation
To set up the energizer for use, install the battery and connect energizer to an electric fence and an earth peg.
Installing the battery
1.
Place the energizer on a flat surface. Open the lid of the energizer by releasing the side latch. Remove any loose accessories from the battery
compartment.
2.
Select a 55 Ah to 150 Ah, 9 volt battery to use with your energizer. Remove the battery label to activate the battery (failure to do this will reduce the
battery life).
3.
Place the battery in the battery compartment.
4.
Connect the positive (red +) lead from the battery to the positive (+) terminal inside the lid of the energizer.
5.
Connect the negative (black -) lead from the battery to the negative (-) terminal inside the lid of the energizer.
6.
Close the energizer lid.
1.
Battery compartment
2.
Side latch
3.
Battery
4.
Battery label
5.
On/Off button
6.
Display (Model SG3 only)
7.
Pulse indicator light
8.
Fence ( ) terminal
9.
Earth (
) terminal
10. Battery indicator light (Model SG1 only)
Light sensor (Model SG3 only)
11. Pulse speed button
1
Werbung
