Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
ASSEMBLING
ACCESSORIES
The accessories can be taken apart if
necessary, for example for cleaning.
The way they are assembled is de-
scribed below.
Fixing the Cutting and Grating
Inserts, Crinkle Cutter, Zester
The cutting or grating insert (1, 9 or
10, 11), the crinkle cutter (15) and the
zester (14) are inserted into the open-
ing in the frame for grating and cutting
inserts (2). First insert the two locking
lugs of the respective insert (Picture C)
and then press the insert against the
frame until it is heard to engage.
Attaching the Functional Lid to the
Frame for Lattice Inserts
1. Place the functional lid with the
punch holder (3) vertically at a
90° angle on the frame for lattice
inserts (5).
2. Press the functional lid with a little
force onto the two locking lugs on
the frame. It must engage audibly
and then be capable of gently
opening and closing (Picture F).
Attaching the Lattice Inserts to the
Frame for Lattice Inserts
Place the lattice insert for small or
large sticks and cubes (8 or 17) into
the opening in the frame for lattice
inserts (5). Make sure that the locking
lugs fit correctly (Picture H). The lattice
insert must be heard to engage.
Inserting the Punch for Lattice
Inserts into the Functional Lid
1. Insert the punch for lattice inserts (4)
into the bottom of the punch holder
of the functional lid (3).
2. Press the punch into the punch
holder (Picture I) until it is heard to
engage.
10
CUTTING STICKS AND
DICING
Please Note!
■
Only cut food by pressing down
the functional lid! Do not attempt
to push it through a lattice insert
with your hand. There is a danger
of injury.
Accessories required:
•
Collecting container (7)
•
Frame for lattice inserts (5)
•
Lattice insert for small or large sticks
and cubes (8 or 17)
•
Functional lid with punch holder (3)
•
Punch for lattice inserts (4)
L
To dice cubes, first cut sticks,
then place them horizontally
on the cutting insert and press
them through.
1. Wash the food, peel and remove
any cores if necessary. Cut larger
pieces of food in half.
2. If the food is to be washed after be-
ing processed, insert the sieve (12)
into the collecting container.
3. Place the frame for lattice inserts on
the collecting container (Picture G).
4. Attach the rest of the accessories
to the frame (see the "Assembling
Accessories" chapter).
5. Place the food on the lattice insert
(with the flat side facing down if it
has been cut in half).
6. Flip the functional lid down towards
the frame swiftly and firmly, and
repeat if necessary. Do not apply
force! The chopped food drops into
the collecting container (Picture J
and K).
Werbung
