TREX TX-380MB RIGON Bedienungsanleitung Seite 61

G B A S S E M B LY
6
Unscrew the screws (8) from the back of the computer (7) using a wrench.
Connect the pulse sensor cables (11) and the extension cable (20) to the wires coming out of
the computer (7). Insert the wires into the inside of the steering column (5).
Attach the computer (7) to the top of the steering column (5) using the screws (8) that were
previously removed. Tighten the screws with a multifunction tool.
Unscrew the screws (19) from the steering column (5) using a multifunction tool.
Attach the bottle holder (18) to the steering column (5) using screws (19). Tighten using
a multifunction tool.
19
6
7
20 11
8
5
18
#19 十字盘头自攻螺钉 ST4.8*15 2PCS
S10-13-14-15 1PCS
#8 预装在 7 上
#19 预装在 5 上
53
#8 M5*10 4PCS
十字盘头螺钉