Specification
Model
Max power
Adapter input
WARNINGS
● Read entire booklet carefully before beginning installation and save these
instructions.
● To reduce the risk of personal injury, attach the fan directly to the support structure of
the building according to these instructions, and use only the hardware supplied.
● To avoid possible electrical shock, before installing your fan, disconnect the power
by turning off the circuit breakers to the outlet box and associated walls with location.
● All wiring must be in accordance with national and local electrical codes. If you are
unfamiliar with wiring, you should use a qualified electrician.
● To reduce the risk of personal injury, do not bend the blade attachment to the system
when installing, balancing or cleaning the fan. Never insert foreign objects between
rotating fan blades.
● To reduce the risk of fire, electrical shock or motor damage, do not lift or carry the fan
by the lead wires.
● Ensure that when mounting the ceiling fan that the fixing can support the moving
weight of the fan which is 20kg(44lb) minimum.
● The fan blades cannot be installed lower than 2.3m from the floor.
CAUTION
● For indoor use only.
● Keep out of reach of children and animals.
● Do not use in the bathroom or damp places.
● Place the lamp on a flat surface and ensure it is placed away from any flammable
materials.
● Before cleaning the lamp, ensure it is switched off.
● Before replacing the bulb, ensure the plug has been removed from the socket and
the lamp has cooled down.
● Do not pull the plug out of the socket with wet hands.
● If the supply cord is damaged it must only be replaced by a qualified engineer.
● Do not touch light bulb while fixture is turned on.
● Never look directly at a lit bulb.
● Notice: Do not repeatedly turning the light on and off.
CARE INSTRUCTIONS:
● Unplug lamp before cleaning.
● Wipe clean with a soft, dry cloth or static duster.
● Always avoid the use of harsh chemicals or abrasive cleaners as they may cause
damage to the fixture's finish.
* Do not discard any contents until after assembly is complete to avoid
accidentally discarding small parts or hardware.
B31-517V00
50W
220-240V~ 50Hz
2