Oil / Changing Oil; Oil Capacity - Texas A/S TG 620 Bedienungsanleitung

6. Oil / changing oil


Always check the oil level when the engine is placed in a horizontal position.

Always check the oil level without fastening the oil stick.
See fig. 5.
TG620 / TG720 / TG820
Change oil in accordance specification with the manual for the machine.
1. Let the engine run 5 minutes, so the engine is hot.
Warm oil liquefies, which makes it easier to drain the oil.
2. Unscrew the drain plug (Fig 6.1) and let the warm oil run out of the engine.
Remember to keep an appropriate container ready.
3. Attach the drain plug and fasten.
4. Add new oil to the engine. Remove the dipstick and pour the correct amount of oil (see
capacity above).
Please dispose the used engine oil environmentally correct. We suggest that you keep the used
oil in a sealed container and dispose at your recycling center or service station for reclamation. Do
not throw it in the waste; pour it on the ground; or down a drain.
Use the correct oil for the specific time of year.
SAE 30 or 10W-40
SAE 30 Art.no 90306506

OIL CAPACITY

CHANGING OIL
OIL
0.6 Litre / 0.6 Litre / 1.1 Litre
12