Werbung
3.12 Version
Displays the software version number.
Installing and using the camera
Choose the location of your security camera carefully.
To avoid false alarms, do not point the camera at
the sun. Also, nearby tree branches moving in the
wind can unintentionally activate the camera. The
camera can be fixed to a tree or other support using
the included strap.
After you have finished configuring the camera, move
the ON-TEST-OFF switch to the ON position. After 5
seconds, the camera enters normal operation mode
(motion detection). The indicator LED will blink 6
times.
Every time it detects motion, the camera will activate
and take photos or record videos according to the
settings made.
Note: the camera takes photos or records videos
silently.
When no motion is detected, the camera enters
standby.
12
Werbung
