MECHANICAL COMPONENTS
4D Armrests with CloudSwap™ Technology
Ensure your armrests are not wedged under the desk when you push your chair in and avoid setting
the armrests at a height that will cause the armrest tops to come into contact with the bottom of your desk
when you tilt your seat.
Improper usage can damage your armrest or even cause injuries. Friction or compression against tables
or heavy objects over long periods of time can compromise the armrest top's structural integrity,
affecting its durability. Keep your armrests away from heavy objects, impacts, and sharp objects.
Prolonged exposure to perspiration and body oils may increase the speed of wear of your armrest tops
over time. To keep them clean and prevent the build-up of perspiration and body oils, wipe your armrest
covers down regularly with an upholstery cleaner or a damp cloth and allow them to air-dry.
Hydraulic Piston
Secretlab chairs are equipped with Class 4 hydraulic pistons and are tested and certified for
durability and reliability. However, the lubricant within the hydraulic piston may settle at the bottom of
the piston over time and will require a simple lubricant redistribution to ensure constant smooth performance.
To do so, please follow the steps below:
01
Raise the height of the chair to its highest position and back down to its lowest position while
seated. Repeat this step for a minimum of 10 times.
02
While seated, adjust the chair's height to its lowest position and slowly rotate the chair
clockwise for 5 full turns.
03
While still remaining seated with the chair at its lowest height, slowly rotate the chair
anti-clockwise for 5 full turns.
Other Components
Components such as the armrests and multi-tilt mechanism should not require regular maintenance,
as long as they are used as intended. Should you encounter any issues with these parts,
please reach out to us for help. If your chair is still within its warranty period, do contact us
at secretlab.co/contact to see if the issue is covered.
18