Dell PowerConnect 27 Serie Erste Schritte Seite 13

To configure the device:
1 Open the web management interface (from any desktop or workstation). To do so,
enter the IP address of the device in the URL field of a web browser.
NOTE:
The web management interface supports the following web browsers:
Microsoft Internet Explorer 6.x or above and Mozilla Version 1.7.x or above.
2 In the Web user interface, Click IP Addressing. The System IP Address window appears.
3 Enter the IP Address, Subnet Mask and Default Gateway.
4 Click Apply Changes. The device is configured.
NOTE:
This getting started guide provides information on the steps necessary for basic setup
of the switch. For more information on the management capabilities of the switch, please refer
the PowerConnect 27xx Series User's Guide found on your documenatation CD.
Getting Started Guide
11