Dell PowerConnect 27 Serie Erste Schritte Seite 10

Installing on a Wall
1 Place the supplied wall-mounting bracket on one side of the device, ensuring that the
mounting holes on the device line up to the mounting holes on the rack-mounting bracket.
The following figure illustrates where to mount the brackets.
Figure 1-2. Bracket Installation for Wall Mounting
2 Insert the supplied screws into the rack-mounting holes and tighten with a screwdriver.
3 Repeat the process for the wall-mounting bracket on the other side of the device.
4 Place the device against the wall and mark the wall through the bracket holes.
5 Drill holes in the wall for the brackets and install the appropriate mounting hardware
(not supplied).
6 Place the device against the wall so that the bracket holes align with the holes in the wall.
7 Insert and tighten the screws through each of the mounting brackets. Ensure that
the ventilation holes are not obstructed.
8
Getting Started Guide
PowerConnect Switch