Dell Networking N1500 Serie Handbuch Zum Einstieg Seite 238

Next, an IP address is set up on the VLAN 1 routing
You can use the IP address to access the CLI, Web
interface, or SNMP interface of the switch.
To access the switch through any Management Interface
.
. Set up the default gateway if IP address is
manually configured on the routing interface.
Would you like to set up the VLAN1 routing interface
Please enter the IP address of the device (A.B.C.D)
or enter "DHCP" (without the quotes) to automatically
request an IP address from the network DHCP server:
Please enter the IP subnet mask (A.B.C.D or /nn):
Finally, set up the default gateway. Please enter the
IP address of the gateway from which this network is
This is the configuration information that has been
Set up the IP address for the Management
reachable. [0.0.0.0]: 10.1.1.1
SNMP Interface = "public"@10.1.2.100
User Account setup = admin
Password = ********
‫מדריך תחילת עבודה‬
Step 3:
interface.
you can
Interface.
Step 4:
now? [Y/N] y
10.1.1.200
255.255.255.0
Step 5:
collected:
263
|