Dell Networking N1500 Serie Handbuch Zum Einstieg Seite 130

ПРИМЕЧАНИЕ:
умолчанию установлен на максимально возможный доступ для интерфейса
управления SNMP. Изначально будет активирован только SNMPv2. SNMPv3
отключен до тех пор, пока вы не настроите защищенный доступ для SNMPv3
(например, идентификатор подсистемы, вид и т. д.).
Please enter the IP address of the Management System
(A.B.C.D) or wildcard (0.0.0.0) to manage from any
Management Station. [0.0.0.0]: 10.1.2.100
Step 2:
Now we need to set up your initial privilege (Level 15) user
account. This account is used to login to the CLI and Web
interface. You may set up other accounts and change
privilege levels later. For more information on setting up
user accounts and changing privilege levels, see the user
documentation.
To set up a user account:
Please enter the user name. [root]:admin
Please enter the user password: ********
Please reenter the user password: ********
Step 3:
Next, an IP address is set up on the VLAN 1 routing
interface.
You can use the IP address to access the CLI, Web interface,
or SNMP interface of the switch.
To access the switch through any Management Interface you
can
. Set up the IP address for the Management Interface.
. Set up the default gateway if IP address is manually
configured on the routing interface.
Step 4:
Would you like to set up the VLAN1 routing interface now?
[Y/N] y
130
Руководство по началу работы
Если настройка осуществлена, уровень доступа по