Cabletech UCH0148 Bedienungsanleitung Seite 9

User manual
5. Install the Adapter Bracket
-C/M-D/M-E
-F/M-G/M-H
•Place projector bracket as close as possible to projector center of gravity.
•Position the holes of arms over mounting holes.
•You can replace the channel foot according to mounting holes position.
Note: If there are only three mounting holes using three arms of adapter bracket.
Important: If the projector does not have at least three mounting holes, do not use this adapter bracket.
Tighten all screws but do not over tighten.
9