Cabletech UCH0148 Bedienungsanleitung Seite 8

3. Install decorative
4. Mount on Solid
W-B
w-c
• When installing wall mounts
I -3/8" (35mm) for using the concrete
mount in a solid part of the block, generally 1" (25mm) minimum from the side of the block.
It is suggested electric drill on slow setting is used to drill the hole instead of a hammer drill
to avoid breaking out the back of the hole when entering a void or cavity.
• Installers must verify that the supporting
equipment and all attached
User
cover
Brick and Concrete
W-A
A WARNING
on cinder block, verify the actual concrete
anchors.
hardware and components.
manual
Block
Do not drill into mortar joints!
surface will safely support
60mm
10m
ø 3/8")
Mark the
location
mounting
Drill
pilot holes
Screw
wall plate
onto
thickness is at least
Be sure to
the combined load of the
exact
of
holes
four
the
the wall