Carl Martin Greg Howe's LickBox Bedienungsanleitung Seite 4

Sample settings
Crunch: Activate the Crunch Channel by pressing the dedicated footswitch (the LED will light up) and then
adjust the Gain to about 11 oclock to start out (later you can play around with this setting to your preference).
Now, bring the Level knob up to a volume that matches your amplifier's volume, and adjust the Tone knob
to your own preference. At any time you can activate the Boost channel for even more level and punch, by
pressing the dedicated footswitch (the LED will light up indicating the Channel is in use).
High Gain: Activate the High Gain Channel by pressing the dedicated footswitch (the LED will light up) and
then adjust the Gain to about 2 or 3 oclock to start out (later you can play around with this setting to your
preference). Now, bring the Level knob up to a volume that matches your amplifier's volume, and adjust the
Tone knob to your own preference. At any time you can activate the Boost channel for even more level and
punch, by pressing the dedicated footswitch (the LED will light up indicating the Channel is in use).
Lead: Activate both the Crunch and High Gain channels by pressing both the dedicated footswitches. Both
Crunch and High gain LED's will light up. Leave the Level and Gain settings at your preference and experience
a third sound that is uniquely controlled, has the ability to cut through any mix and supplies loads of sustain.
Experiment with different amounts of Crunch and High Gain for an entirely new palette of sounds. Of course
you can activate the Boost channel at anytime to add one more dimension to your sound for leads or that very
specific tone that only the Carl Martin Lick Box can supply!
4 Carl Martin Greg Howe's LickBox User Manual