Viewing And Selecting Slots And Server Modules - Dell PowerEdge 1955 Serie Konfigurationsanleitung

5 Click OK in the Names dialog box to save your changes.
-or-
Click X or press <Escape> to exit the dialog box without saving changes.

Viewing and Selecting Slots and Server Modules

You can view your server modules by name or by slot. The slot number is determined by the slot
number which a server module occupies. You will see an OSCAR-generated Name list by default
when you first launch OSCAR.
To access the Main dialog box:
1 Press <Print Screen> to launch OSCAR.
If no password is assigned, the Main dialog box appears.
If a password has been assigned, the Password dialog box appears.Type your password
and click OK.
2 The Main dialog box appears.
NOTE:
The status of server modules in your system is indicated in the far right column of the Main dialog
box. Table 2-1 describes the status symbols.
Table 2-1. OSCAR Status Symbols
Symbol
Selecting Server Modules
Use the Main dialog box to select server modules. When you select a server module, the KVM
switch reconfigures the keyboard and mouse to the proper settings for that server module.
To select server modules:
• Double-click the server module name or slot number.
• Type the slot number and press <Enter>.
• If the display order of your server module list is by name (Name button is depressed),
type the first few letters of the name of the server module and press <Enter> twice.
36
Configuring the KVM Switch Module
You can also press the <Ctrl> key twice within one second to launch OSCAR.
Description
Server module is powered on
Server module is powered off or not installed
User connection