Werbung
Questions or Setup Issues?
Contact the HyperX support team at hyperx.com/support
WARNING: Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.
Battery Replacement
1. Power OFF the headset.
2. Carefully pull the left ear cushion from the headset.
3. Unscrew the 4x Philips screws to separate the driver cover from the left earcup.
4. Gently separate the cover from the earcup to avoid any damage.
5. Locate and remove the battery secured with a connector.
6. Place new battery matching correct pin orientation.
7. Close the driver cover and earcup. Reverse steps 3 and 2. Make sure to push cushion into the slot all around the earcup.
8. Power ON the headset and test for functionality.
Werbung
