HABYS Upright Chiro Z7 Bedienungsanleitung Seite 5

VI. PRODUCT USE
1. Securing the patient.
The table is equipped with 2 straps (included) to secure the patient against further work. The belts should be
attached using special holders on both sides of the table.
2. Adjusting the table height with the steering frame.
The steering is done by moving and holding any point of the frame with the foot vertically (up or down). The
steering frame is located around the base of the table. By sliding the frame down, the table top rises. By
shifting the frame upwards, the table top is lowered.
UP DOWN
3. Adjusting the table height with a manual remote control (available as an option).
The control is done by pressing one of the buttons marked with arrows - up / down.
UP DOWN UP DOWN
4