Beyerdynamic DT 990 PRO X Bedienungsanleitung Seite 4

HOW TO CONNECT THE CABLE
The lockable cable is fitted with a 3-pin mini XLR
�
cable connector at the end that connects to the
headphone.
To attach the cable correctly, the small release
�
button of the cable must face outward.
When connecting the cable, make sure that the
�
cable connector locks in place under the ear cup
of the DT 990 PRO X.
release button
When you want to change the cable, please press
�
the small release button, and simultaneously pull the
cable connector from the DT 990 PRO X.
Connect the stereo jack plug of the cable to
a headphone output only! If you connect the
DT 990 PRO X to any other jack socket, it could
be damaged.
DT 990 PRO X — Studio Headphone
HOW TO CHANGE THE EAR PADS
�
�
release button
�
Use your fingertips to carefully pull the ear pad away
from the housing.
Insert the plastic lip of the ear pad into the groove of
the housing and turn the ear pad clockwise until it is
fully attached.
Turn the attached ear pad a few times, as indicated
by the arrow.
4