Intex Built-in Fast-Fill AP620A Bedienungsanleitung Seite 5

Vorschau ausblenden Andere Handbücher für Built-in Fast-Fill AP620A:

Verfügbare Sprachen

INFLATION OPTION

1. If electrical power is not available then a conventional foot

or manually operated air pump can be connected to the

control dial valve for inflation. See Fig (11).

2. Turn the control dial clockwise until arrow points to the

inflation mark (

3. Insert air pump nozzle to the control dial valve to inflate

the airbed.

STORAGE

1. Deflate the airbed following the "DEFLATION" instructions.

2. Turn the control dial counterclockwise until arrow points to deflation mark (

Fig (8).

3. Make sure the airbed is clean and dry.

4. Lay bed flat with sleeping surface facing upwards and follow the folding steps on Figs

(12 - 16). Fold the airbed loosely and avoid sharp bends, corners and creases which can

damage the airbed.

FIG (12)

INTEX

FIG (15)

5. Turn the control dial fully clockwise. See Fig (10).

6. Place the airbed inside the storage bag and store in a dry, cool storage location.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas

registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex

Marketing Ltd. to/à/a/an Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA

90801 • Distributed in the European Union by/Distribué dans l'Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen

Union durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands

www.intexcorp.com

SAVE THESE INSTRUCTIONS

(152) AP620A BUILT-IN ELECTRIC PUMP ENGLISH 4.875" X 7.25" 06/26/2018

Page 5

FIG (13)

INTEX

FIG (16)

English

152

FIG (11)

). See

FIG (14)