Ryobi RDS4 Bedienungsanleitung Seite 3

ORIGINAL INSTRUCTIONS
EN
Safety, performance, and dependability
have been given top priority in the
design of your scrubber.
INTENDED USE
The scrubber is intended for cleaning
exterior and interior surfaces. It can be
used with water.
Do not use the product for any other
purpose. Use of the product for
operations different from intended use
could result in a hazardous situation.
WARNING! Read
warnings, instructions, illustrations
and specifications provided with
this power tool. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions
for future reference.
SCRUBBER SAFETY WARNINGS
■ Beware of splashing when using the
product with water or cleaning agents.
■ Maximum force that can be applied
on the product before stalling is 70 N
at maximum torque and low speed.
Do not exceed the maximum force.
■ The product will restart automatically
if stalled. Switch off the product
immediately if it stalls. Do not switch
on the product again while it is still
stalled, as doing so could trigger a
sudden recoil with a high reactive
force. Determine why the product
stalled and rectify this, paying heed
to the safety instructions.
■ Injuries may be caused, or aggravated,
by prolonged use of a tool. When
using any tool for prolonged periods,
ensure you take regular breaks.
■ Ambient temperature range for tool
during operation is between 0 °C
and 40 °C.
■ Ambient temperature range for tool
storage is between 0 °C and 40 °C.
■ The
temperature range for the charging
system during charging is between
10 °C and 38 °C.
ADDITIONAL BATTERY SAFETY
WARNINGS
■ To reduce the risk of fire, personal
injury, and product damage due to
a short circuit, never immerse your
all safety
tool, battery pack, or charger in fluid
or allow fluid to flow inside them.
Corrosive
such as seawater, certain industrial
chemicals, and bleach or bleach-
containing products, etc., can cause
a short circuit.
■ Ambient
battery during use is between 0 °C
and 40 °C.
■ Ambient temperature range for battery
storage is between 0 °C and 20 °C.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance
with local and national provisions and
regulations.
Follow
on packaging and labelling when
transporting batteries by a third party.
Ensure that no batteries can come
in contact with other batteries or
conductive materials while in transport
by protecting exposed connectors with
insulating, non-conductive caps or
tape. Do not transport batteries that
are cracked or leaking. Check with the
forwarding company for further advice.
recommended
or conductive
temperature range
all special requirements
ambient
EN
FR
DE
ES
fluids,
IT
NL
PT
DA
SV
FI
NO
for
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
3