Assembly And Start-Up Instructions; Technical Specifications - Decora 9276010 Bedienungsanleitung

8. Assembly and start-up instructions

1. Assemble and couple the adapter with the turntable.
2. Insert the plug into the power outlet.
3. Power on the device by setting the switch on the back to position 1. The red light
on the front of the housing is activated.
4. Press the button on the front. The red light switches off and the green
light is activated.
5. Place the cake or preparation that you wish to decorate on the turntable surface.
6. Turn the knob on the front of the unit to adjust the direction and speed of rotation.
7. To activate the stand-by mode and lock the rotation of the turntable, press the
stand-by button.
8. To restart from the stand-by mode, press the button again; the turntable restarts
with the same rotation and speed that was used previously.

9. Technical specifications

Reference supplier item
Dimensions
Plate dimension
Material
Electrical power
Electric voltage
Maximum current absorbed
Electrical insulation class
Rotational speed
Direction of rotation
Maximum load weight
Acoustic power
Degree of protection
Net weight
Certifications
Temperature Range
Maximum Room Temperature
9276010
Diameter 30 cm * Height 10 cm
28cm
Acrylonitrile Butadiene Styrene - ABS
AC110V-230V ,50-60Hz
DC 12V
1A
NA
0-60rpm
CW/ CCW
5 Kg
55db≥
IP11
2.5 Kg
CE /FCC /ROHS
For use indoors and only in dry environments
-10° ~ 45°
17