Replacing The Fuse; Technical Specifications - Omnitronic CPA-5200 Bedienungsanleitung

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Conference amplifier:
Power supply:
Power consumption (max.):
Inputs:
1 mono:
2 stereo Aux
2 Aux-Return
Outputs:
1 Main Mix Out
1 Aux-Send
Fuse
Dimensions:
Weight:
Conference microphone: CU-200 SP/DU-200 SP
Directivity pattern:
Frequency-range:
Impedance:
Sensitivity:
Nominal voltage:
Max. operation voltage:
Current consumption:
Dimensions:
Weight:
Please note: Every information is subject to change without prior notice. 10.10.2005 ©
CPA-5200
115/230 V AC, 50/60 Hz ~
60 W
balanced ¼" jack
RCA
RCA
RCA
RCA
F2A
483 x 355 x 95 mm
8 kg
Cardioid
100 Hz - 16 kHz
600 Ohms
-44 dB
1,5 V
10 V
0.5 mA
150 x 130 x 60 mm
0.8 kg
22/22 8080050_V_1_0.DOC