Delegate Microphone Unit Du-200 Sp - Omnitronic CPA-5200 Bedienungsanleitung

7. FUSEHOLDER
Only replace the fuse when the device is disconnected from mains. Only use fuses of the same rating and
power.

Delegate Microphone Unit DU-200 SP

The delegate microphone unit is equipped with one button, the microphone button. Using this button, the
delegates can switch their microphone unit on and off.
Depending on the operation mode of the control unit the microphone unit is allocated a free transmission
channel and the microphone is switched on or registered as request-to-speak. When the microphone is
switched on, the red ring around the gooseneck of the microphone and the LED in the housing will illuminate
red. In the request-to-speak mode the green LED indicates the request-to-speak. If the maximum number of
open delegate microphones is achieved (normally 3, max. 6), the microphone is only turned on when another
microphone unit is switched off.
Gooseneck microphone with illuminated lightring
The lightring illuminates when the microphone of the console is active.
Loudspeaker
The Loudspeaker is switched off when the local microphone is activated.
Microphone button
Using this button, the delegates can switch their microphone unit on and
off.
LED to indicate the function (green/red).
Headphone socket
1/8" stereo headphone socket. The console speaker
switches off when you connect headphones.
Headphone volume control
Adjusts the headphone volume.
19/22 8080050_V_1_0.DOC