Conference Amplifier Cpa-5200 - Omnitronic CPA-5200 Bedienungsanleitung

Conference Amplifier CPA-5200

Frontpanel
The CPA-5200 is the heart of the system. It controls the delegate and chairman microphone units.
1. POWER SWITCH
Press this button to start operation.
2. POWER-LED
3. MIC CONTROL
Used to set the level of the MIC input signal.
4. PB-CONTROL
Used to set the level of the LINE input signals.
5. -CONTROL
Select the operation mode and the maximum number of microphones to be activated simultaneously.
6. MASTER LEVEL CONTROL
Adjusts the level of the microphone units.
Rear panel
1. MIC-SOCKET
Connect your microphone with ¼" jack plug here. The signals can be controlled via the control MIC.
2. LINE IN AUX/PB
Unbalanced input via RCA sockets. The PB line in signals can be controlled via the PB-Control.
3. LINE OUT
Unbalanced output via RCA sockets.
4. EXT-SOCKET
Input socket for a further conference amplifier.
5. GROUP INPUT
Input sockets for the microphone units.
6. AC-CONNECTION
18/22 8080050_V_1_0.DOC