Werbung
Tools Required
①
Phillips Head Screwdriver
Parts Included
②
2x Front Hooks
⑤
4x Front Screw
Assembly Instructions
1
Using the fine-threaded rear screws, install the rear hooks
onto the threaded holes on the rear frame rail of the table.
The open end of the hook should face under the table.
2
Using the coarse-threaded front screws, install
the front hooks into the pre-drilled holes on the
worksurface. The open end of the hook should
face the rear hooks.
2
③
2x Rear Hooks
⑥
4x Rear Screw
④
1x Basket Assembly
Configuration-specific,
Appearance varies by size
⑦
⑧
Werbung
