TP-Link Powerline Kurzanleitung Zur Installation Seite 8

English
Attention
• Plug the powerline devices directly into the wall outlets but not the power strips.
• For passthrough powerline devices, plug the power strips into the integrated
electrical sockets of the powerline devices.
Secure the Powerline Network with the Pair Button
Tips: We recommend that you plug in the powerline devices near each other when
pairing.
Set up a secure network:
1 Within 2 minutes, press the Pair button
for 1 second on each adapter. The LED
should start blinking.
6
A
2 When the Powerline LED turns
solid green, it's done.
B
Solid Green