TP-Link Powerline Kurzanleitung Zur Installation Seite 10

English
A1. Make sure all powerline devices are on the same service panel.
A2. Make sure all Powerline LEDs
again.
A3. Make sure all hardware connections are correctly and securely connected.
A4. Check if you have an internet connection by connecting the computer directly to the
modem or router.
A5. Make sure your computer's IP address is in the same segment as your router's.
Q3. What can I do if a successfully-paired powerline device does not reconnect after it has
been moved to a new location?
A1. Try another socket and make sure it is on the same service panel.
A2. Try to pair it again, and make sure the Powerline LED
A3. Check for possible interference, such as a washer, air conditioner or other household
appliances that may be too close to one of the powerline devices. Plug the appliance into
the integrated electrical socket (if the powerline device has one) to remove some electrical
noise.
More advanced configurations, such as firmware upgrade and QoS configuration, can be
accessed through the tpPLC Utility. You can install the tpPLC Utility from the TP-Link official
website.
8
are solid green. If not, pair your adapters and extenders
is solid green.