Switch On/Off - Rollei Lux 60 Rgb Bi-Color Anleitung

Operation
Remove the protective film: Before using the COB
permanent light for the first time, remove the protective
film from the device and the display .
Remove the protective cap: Remove the protective
cap from the COB permanent light before each use,
before switching on the device .
Follow these steps to ensure proper and safe use of the COB
permanent light .

1. Switch on/off

– Switch on: Connect the device to the power source and then press
and hold the on/off switch [1] .
– Switch off: Long press the on/off switch [1] to switch off the
device .
2. Wireless connection
– Briefly press the wireless connection setting button [2] to switch
between 2 .4GHz (remote control for Candela/Lux) and app .
– Press the button button for a long time to start the pairing to start
pairing .
3. HSI mode (only for RGB lights)
– Switch to HSI mode
– Briefly press the adjusting dial [11] to select the HUE/SAT options .
– Turn the adjusting dial [11] to adjust the colour tone [HUE] and
saturation (SAT) according to your wishes .
– Hue (HUE): 0 – 359° Saturation (SAT): 0 – 100 %
– These steps allow you to easily adjust the colour and the intensity
of the lighting in HSI mode to achieve the desired effect .
61