Metabo RB 18 LTX 60 Originalbetriebsanleitung Seite 14

en
ENGLISH
P = Power output
2
B = Sanding belt width
B
B = Sanding belt length
L
D = Machinable tube diameter
U = max. angle of contact
a, max.
v = Belt speed in idling
0
m = Weight with smallest battery pack/weight
without cord
Measured values determined in conformity with
EN 62841.
Permitted ambient temperature during operation:
-20 °C (-4°F) to 50 °C (120°F) (limited performance
with temperatures below 0 °C (32°F)). Permitted
ambient temperature for storage: 0 °C (32°F) to
30 °C (86°F).
Direct current (cordless machines)
~
Alternating current (mains powered machines)
Machine in protection class II (mains powered
machines)
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
RBE 9-60: Energy-rich, high-frequency interference
can cause fluctuations in speed. However, the
fluctuations disappear as soon as the interference
fades away.
Emission values
Using these values, you can estimate the
emissions from this power tool and compare these
with the values emitted by other power tools. The
actual values may be higher or lower, depending on
the particular application and the condition of the
tool or power tool. In estimating the values, you
should also include work breaks and periods of low
use. Based on the estimated emission values,
specify protective measures for the user - for
example, any organisational steps that must be put
in place.
Vibration total value (vector sum of three directions)
determined in accordance with EN 62841:
a = Vibration emission value
h
(surface grinding)
K = Uncertainty (vibration)
h
Typical A-effective perceived sound levels::
L = Sound pressure level
pA
L = Acoustic power level
WA
K , K = Uncertainty
pA WA
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
14