EDIFIER W280NB Pro Bedienungsanleitung

W280NB Pro
Wireless Noise Cancelling Neckband Headphones
EN 1. Power ON/OFF
Press and hold the power button to power on/off.
2. First pairing
1. Once powered on, the headphones will automatically enter Bluetooth
pairing mode.
2. Select "EDIFIER W280NB Pro" from your device list to connect.
3. Pairing for new device
1. In ON state, press and hold the MFB button for about 3 seconds
to enter Bluetooth pairing mode.
2. Select "EDIFIER W280NB Pro" from your device list to connect.
Note: For subsequent use, the headphones will automatically connect
to the device used last time.
4. Reset
1. In ON state, press the "+" and "-" buttons for 5 seconds, green LED
will blink until the reset is complete.
2. Then the headphones will automatically enter Bluetooth pairing mode.
5. Multipoint connection
①
②
③
Bluetooth
EDIFIER W280NB Pro
1. Pair device A with the headphones successfully.
2. Press and hold the MFB button for 3 seconds to re-enter Bluetooth
pairing mode, and then select "EDIFIER W280NB Pro" in device B
settings to connect.
3. Select "EDIFIER W280NB Pro" again in device A settings to complete
the multipoint connection.
Note: For subsequent use, the headphones will automatically reconnect
to the two devices used last time.
6. Controls
Call
●
● Music
Mode
●
x2
Note:
1. Default sound control: High Noise Cancellation / Ambient Sound / Noise
Cancellation off.
2. "x 1" Press , "x 2" Double press, "—" Press and hold.
3. Download EDIFIER ConneX App to customize more control settings.
7. Charging
Connect the headphones to a power source via the USB-C cable for
charging.
Note: Make sure the USB-C port is completely dry before charging.
Manual
1s
ON -
1s
OFF
-
3s
MFB (Multi-Function Button)
x6
3s
A
Bluetooth
EDIFIER W280NB Pro
EDIFIER W280NB Pro
x1
x1
x2
x1
Bluetooth
5s
Bluetooth
EDIFIER W280NB Pro
A
B
Input: 5 V 500 mA