Noise And Vibration - Ff Europe Timbertech Tbslf07 Original Aufbauanleitung

• Limit the noise levels and vibrations to a minimum!
• Use only flawless machines.
• Clean and maintain the machine regularly.
• Adapt your working stile to the machine.
• Do not over-load the machine.
• Allow the machine, occasionally, be checked.
• Turn the machine off, when not in use.
• Wear gloves.
Sound Pressure Level L
Uncertainty K
Sound Power Level L
Uncertainty K
Hand-arm-vibration
Uncertainty K
WARNING! The vibration emission value during actual use of the power tool can differ
from the one specified in the user manual or the one provided by the manufacturer. This
can be caused by the following factors, before or during each of use, the following points
should be considered:
• Is the machine being used correctly?
• Is the method of cutting and processing the material correct?
• Is the machine being used in good condition?
• Are the grab handles mounted back to optional vibration handles and are they fixed to the
machine body?
Wear ear protectors against the loud noises!
The effect of loud noise can cause hearing damage.
• The stated vibration emission value was measured with standardized test procedures and
can be used to compare power tools with one another.
• The vibration emission value can also be used for an initial assessment of the exposure to
the hazard.
• The vibration emission value can differ from what is stated during the actual use of the
power tool, depending on the way in which the power tool is being used.
DE FR EN ES EN

NOISE AND VIBRATION

PA
PA
WA
WA
34
89,5 dB(A)
3 dB(A)
100,5 dB(A)
3 dB(A)
2,684 m/s²
1,5 m/s²