Midea MDRB424FGE01OA Benutzerhandbuch Seite 10

Verfügbare Sprachen

3. Dismantle the middle hinge, the screws, the screws hole caps and remove the

freezer door.

4. Dismantle the bottom hinge, hole caps and screws, Install the bottom hinge

shaft on other side of the bottom hinge, then install the hinge on the other

5. Dismantle the screws, sleeve pipe and stopper on the lower end cover of the

two door bodies, and install them successively on the other side of the door

bodies . Then remove the upper end cover of the cooler door and switch the

wire harness with a sleeve pipe to the other side of the door body. Finally

install the sleeve pipe of the upper hinge on the cooler door in the hole on

the other side of upper end cover of the cooler door.