Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9. With all power "OFF" to the unit and measurement
circuits connect the sensor end to the applicable
Dranetz unit. Next, position the flexible current sensor
around the conductor wires of your measurement
circuit and connect the sensor ends until they mate
securely.
10. Refer to the applicable Dranetz User's Guide for
additional
operation, and connections of your instrument.
WARNING
Make sure all connections are properly connected
before power is applied to the measurement circuits.
Failure to do so could result in risk of fire, electrical
shock, or physical injury.
11. Power "ON" the unit and then turn power "ON" to the
measurement circuits and you can now return to
normal operation.
information
concerning
Seite 20 von 54
installation,
Werbung
