Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CAUTION
The current sensor will not operate properly if the correct
polarity is not properly connected when using an external
supply.
There are two optional 3 VDC power supplies available
for use with the DRANFLEX series flex sensors.
•
ISOFLEX-MHXL uses the Dranetz instrument
power supply for products that are powered by
12 VDC. This accessory provides a pass through
12 VDC output for connection to the instrument and a
3 VDC isolated output to power flex type current
sensors only.
•
ISOFLEX-MHXLU provides a 3 VDC isolated
output to power flex type current sensors only. This
accessory uses an attached wall plug power supply
with interchangeable input plugs for North America,
Euro, UK, and Australia.
Seite 17 von 54
Werbung
