Dustcontrol DC Tromb 400 H Asbest Bedienungsanleitung Seite 37

1. The bag cassette is closed at one end with a cable tie. When the bag starts to fill or you want to change the
bag, just pull it down and new material will come out of the cassette and the bag will be longer.
2. To make a new sack, the sack material is pulled down and sealed at the top with cable ties.
3. Another cable tie is placed above the first and between them the bag material is cut off.
Changing the bag magazine
NOTE
The machine must be switched off during the entire bag magazine change.
1. Turn the holder to the position where it can be pulled down.
2. Apply a sack magazine to the holder and reassemble it.
3. Cut the 4 straps that hold the bag magazine together and pull the inner end of the bag upwards over the
rubber strip. Then tighten the sack with the strap. The outer end is pulled down over the holder and a cable tie
is attached as a bottom closure.
DC Tromb 400 H Asbest
37