Advance PROTECT II RIS Betriebshandbuch Seite 41

Putting the canopy into the 4-flap inner container
Fold the canopy in a series of horizontal S-folds. The length of the
folds should match the length of the inner container. Then lay the
S-folded pack, canopy base at the top, in the 4-flap inner container
(Pic 9).
Gathering the lines
Next the lines are gathered up. Zigzag the lines in, making U shaped
loops, and hold the ends with elastic bands. Make sure that the loops
are not longer than the width of the container, and leave the last 50
cm (for the envelope inner container) or 30 cm (for the 4-flap inner
container) of the lines free. This remaining length of the lines is used
to fasten the inner container (Pic 10).
Pic 9
Pic 10
41