Dehumidification
function not
working properly
The cooling
function is not
working properly.
Unit does not
supply cold air
The device is
noisy
When the
appliance is in
operation, a
specific odour is
emitted into the
room
Compressor not
working
INSTRUCTION MANUAL
The room temperature is
too low during
dehumidification
The device is exposed to
sunlight
Doors or windows are
open; there are other heat
sources in the room
The filters are dirty
Air outlet or inlet is
blocked
During cooling, the room
temperature is lower than
the selected temperature
No refrigerant
The device was damaged
The air conditioner was
not placed on a flat
surface
The filters are dirty
Overheating protection is
activated
Automatic defrost
function activated
Increase the room
temperature. For the
dehumidification function
to work properly, the
room temperature must
°
exceed 17
C
Keep the device away
from sunlight
Close doors and
windows, move the unit
away from other heat
sources
Clean or replace filters
Check and remove any
obstructions to the air
discharge
Change the temperature
setting
Contact the Yoer service
Contact the Yoer service
Place the device on a flat,
stable surface
Clean filters
Wait 3 minutes for the
temperature to drop and
switch the appliance on
again
EN
75