EN
Timer
To set the timer, press
so that you can then use
the unit should start. If the air conditioner is already running, it is
possible to schedule the time after which the unit should switch off.
The indicator light will remain illuminated on the panel until the
appliance is programmed to switch on or off. To remove the timer
setting, press
Additional features
Memory function
The unit remembers the last selected settings when it remains
plugged in. When it is switched on again, it automatically starts up with
the stored parameters.
Frost protection function
During cooling operation, when the temperature in the air discharge
pipe is too low, the frost protection function is automatically activated.
When the temperature rises to a specific value, the unit will
automatically return to its previous state.
66
INSTRUCTION MANUAL
on the panel when the air conditioner is off
and
again . Time adjustment range: 1-24 h.
to schedule the time after which