Problem Solving - Yoer Frost Box Pac03W Gebrauchsanweisung

EN

Problem solving

Problem
Device does not
work
The device
switches off
during operation
Unit does not
generate cold
and/or warm air
Heating function
does not work
properly
74
INSTRUCTION MANUAL
Possible cause
The device is not
connected to the power
supply
The water tank is full. This
is indicated by the light
illuminated on the panel
The room temperature is
too high or too low
Exhaust air pipe is
clogged
There are squashes or
kinks in the discharge
pipe
The device was damaged
During heating, the room
temperature is higher
than the selected
temperature
Solution
Connect the device to the
power supply
Empty the water tank
The appliance should be
installed, used and stored
in a well-ventilated room
with a surface area
greater than 12 m
a room temperature
between 7 and 35
°
(44-95 F)
Check that there are no
obstructions preventing
air from being vented to
the outside
Fix the pipe properly,
avoiding exposing it to
crushing or kinking
Contact the Yoer service
Change the temperature
setting
2
and
°
C