INSTRUCTION MANUAL
EN
Tank full indicator - when the water exceeds the
maximum level, the appliance will beep and
automatically switch off and the indicator light on the
panel will be illuminated. A corresponding message
will be displayed in the appliance application. This
means that the tank needs to be emptied of excess
water
Adjusting the airflow direction - press to start the
movement of the air outlet cover, then press again to
accept the selected position
Press to start the cooling function
Press to start the dehumidification function
Press to start the ventilation function
Press to start the heating function
Press to select a low operating speed. This function is
not available for night mode and dehumidification
Press to select high speed operation. This function is
not available for night and dehumidification modes
Night mode - when operating in this mode, the unit
operates at low speed. This mode can only be
To deactivate
activated during cooling and heating.
night mode, press the button again
Wi-Fi - the button is used to connect the device to
the mobile app. Press and hold for approx.
3 seconds to connect the device to the app
57