EN
Storage
Note: Keep the unit in a dry, clean place in its original packaging.
1.
Empty the water tank according to the instructions in the
EMPTYING THE WATER TANK section.
2. Place any container under the top outlet of the water drain and
protect the floor from possible contact with the water. Carefully
remove the drain plug from the upper water drain outlet, attach the
drain hose and allow any residual water to flow out of the appliance
tank into the container. Start the ventilation mode and set a low
speed. This will keep the inside of the appliance dry, effectively
preventing mould growth.
3. Switch off the appliance when you notice that the drain hose is
completely dry and no water is coming out of the appliance.
Unplug the power cord.
4. Wind the cable onto the intended holder.
5. Remove all accessories and store them safely.
6. Remove the batteries from the remote control and store in a dry,
safe place.
72
INSTRUCTION MANUAL