INSTRUCTION MANUAL
EN
Compressor protection function
To increase the life of the compressor, the unit has protection in the
form of a 3-minute delay when the compressor is switched off.
Overheating protection function
During heating operation, when the temperature in the air discharge
pipe becomes too high, the overheating protection function will
automatically activate. When the temperature drops to a specific
value, the unit will automatically return to its previous state.
Overflow protection function
When the water level in the tank exceeds the maximum allowable
level, the appliance will emit a distinctive beep and the full water tank
indicator light will be illuminated on the control panel. In this situation,
empty the water tank by following the instructions in the EMPTYING
THE WATER TANK section.
Automatic defrost function
During heating operation, when the temperature in the air discharge
pipe drops below a certain level, the unit automatically activates the
defrost function. Once the defrosting process is complete, the unit
automatically returns to normal operation.
67