FISCHER CRASH SENSOR FIND.U Montage- Und Bedienungsanleitung Seite 21

The sensor goes into sleep mode after 5 minutes if there is no connection to the app.
If you use other apps or functions on your smartphone while riding, check
afterwards whether the sensor is still connected.
7.3 Setting the riding time
Optionally, you can set your ride time manually. To do this, start your journey in the menu:
This setting enables an emergency text message if you have an accident without falling. If
your ride is not completed after the set ride time has expired, the alarm countdown starts.
1. Press the
2. Select your planned ride time.
Activate ride time with :
Or select if you do not want to
activate a journey time.
3. Press "
"Yes" if you want to end the journey time.
Alternatively, you can close the app.
7.4 Alarm
In the event of a fall or if you have not completed your ride before the set time has elapsed,
a countdown starts first, followed by the alarm and your emergency contacts are informed.
The length of the countdown can be set from 15 to 60 seconds. Select the desired length for
the countdown under
1. To cancel the alarm, press
before the
countdown has ended.
2. If you do not stop the countdown, an
SMS with your GPS location will be
sent to your emergency contact. Your
emergency contact can now carry
out assistance measures. Discuss in
advance with your emergency con-
tact what measures should be taken
in an emergency.
Your smartphone should always be easily accessible so that you can switch off a false alarm as
quickly as possible.
to set a ride time.
.
" and confirm with
select the desired length for the countdown.
Countdown
21