FISCHER CRASH SENSOR FIND.U Montage- Und Bedienungsanleitung Seite 19

Under you can enter a second emergency contact later. In the event of an emergency mes-
sage, both contacts will receive an emergency text message.
Inform your emergency contact in advance so that they are prepared for an emergency.
Discuss with them what action should be taken in the event of an emergency message. Only
use cell phones for your emergency contact, as the emergency message is sent as an SMS.
7. Activate or deactivate the test SMS to your emergency contact. Press "Next".
Sending the emergency text message may incur additional costs.
8. Connect the FIND.U app to the sensor.
Activate the sensor by shaking it. The
LED on the sensor flashes blue after
activation.
The sensor identification number is dis-
played. Press the sensor identification
number to connect the sensor to the
app.
You can also connect the sensor later using the
7. FIND.U APP FUNCTIONS
In the menu bar under
start and end your riding time and connect or disconnect the sensor.
Under you can change your app settings (see chapter "Settings").
7.1 Connecting the sensor before the ride
The sensor must be activated and connected before every ride.
To do this, open the FIND.U app.
If the app shows a disconnected connection to the sensor in
the top right-hand corner, shake the sensor to activate it.
The app will automatically connect to the sensor.
1. If the sensor does not connect automatically,
press "Connect sensor".
to view the status of the sensor (connected or disconnected),
connect.
19