FISCHER CRASH SENSOR FIND.U Montage- Und Bedienungsanleitung Seite 20

2. Press on the listed sensor and select "Reconnect device".
3. Use the arrow
Under
7.2 Ride with connected sensor
Your sensor is connected and activated for driving when the
text "You are protected and ready to drive" is displayed.
Requirements for operating the sensor:
• You must have your smartphone switched on with you during the entire journey. Smartphone and
sensor must be sufficiently charged for the journey.
• Bluetooth and location service must be switched on in the basic settings of your smartphone.
Flight mode and silent mode must not be activated.
• The FIND.U Emergency message only works if you are connected to at least the e-network
(EDGE). The crash sensor cannot send an emergency text message in an area without network
coverage.
If the Bluetooth connection is lost while driving, a warning signal sounds. The warning signal
stops as soon as the connection is re-established or when you close the app.
20
in the top left to return to the "Drive" menu.
you can also connect the sensor.