Create WARM TOWEL PRO Benutzerhandbuch Seite 9

TOUCH PANEL
Display
I.
PR sensor / Wi-Fi signal control
2.
3. Power or / Off
4. Mode
Temperature
5.
Timer
6.
• Power (5: When the product is on, press Power. The upper part of the display shows
the temperature.
• Mode: Press Mode to regulate low, or high temperature
• Temperature : Press temperature
400C. Internal temperature
temperature can be set when the appliance
the room temperature
the low temperature
over the set temperature,
operating. The machine
2 degrees with respect to the set temperature.
• Timer e: The timer button can be set to start or stop the appliance at the desired
time, with a time
REMOTE CONTROL
I. Power button
Mode
2.
3. Temperature
Timer
4.
Lock
5.
The touch screen buttons
functions.
The Child lock function
• Child Lock 0 Press the
it can't be switched
heater is unlocked.
The heater is working
is displayed
reaches the set level, the high temperature
power remains
both the high and Lower temperature
will begin operating
interval between I hour and 24.
2
3
located on the product
can be found
child clock
on. After pressing
2 0
3
4
at low power heating conditions
button, the temperature
every time the appliance
is in stand-by
active. When room temperature
again only when temperature
CREATE
correspond
on the remote control:
button for 3 seconds,
Child Lock button
as default.
power.
can be set from 50C to
is started
or heating modes. When
power stops and
is 2 degrees
pcwers
to the remote
the heater is Locked
for 3 seconds
ENGLISH
5
6
up. The
will stop
decreases
4
5
control
and
again, the
9