Homend FUNCTIONALL 2844H Benutzerhandbuch Seite 29

Feeding tube and pusher
+ Use the feeding tube to add liquid and/or solid ingredients.
+ Use the pusher to push solid ingredients down the feeding tube.
Tip: You can also use the pusher to close the feeding tube. This prevents
ingredients from escaping through the feeding tube.
Blade unit
You can use the blade unit to chop, mix, blend or puree ingredients.
1- Remove the protective cover from the blade. The cutting edges
are very sharp. Do not touch them.
2- Put the tool holder in the bowl.
3- Put the blade unit on the tool holder in the bowl .
4- Put the ingredients in the bowl. Pre-cut large pieces of food into
pieces of approx. 3 x 3 x 3cm.
Note: Always put the tool holder with the blade unit in the bowl before
you add the ingredients.
5- Put the lid on the bowl. Turn the lid clockwise to fıx it ('click').
Note: Make sure the projection on the lid locks into the slot of the bowl
handle.
6- Put the pusher in the feeding tube.
7- Select the speed that corresponds with the colour of the accessory.
8- When you have fınished processing, turn the speed selector to 0 and
unplug the appliance.
Tips
+ When chopping onions, you can chop the onion pieces to the desired
size at your own control by turning the button to P (pulse function).
+ Do not let the appliance run too long when you chop (hard) cheese or
chocolate. Otherwise these ingredients become too hat, start to melt
and turn lumpy.
U S E R ' S M A N U A L 2 7