Addition - Expanding An Existing Network By Adding Another Devolo Magic Adapter - Devolo Magic 2 Lan Triple Handbuch

CAUTION! Tripping hazard
Lay the cable in a barrier-free manner and
ensure that the electrical socket and the
connected network devices are easily ac-
cessible
Plug both devolo Magic adapters into available
3
power sockets within 3 minutes. As soon as the
LEDs on both adapters flash white at regular
intervals of 0.5 sec., they are ready to operate
and automatically start the process of establis-
hing an encrypted connection to each other
(see Chapter 2.3.1 Reading the indicator
light).
If the LEDs on both devolo Magic adapters
light up in
devolo Magic network has been set up ac-
cording to your individual specifications
and is protected from unauthorised access.
white, then your
3.4.2 Addition – Expanding an existing
network by adding another
devolo Magic adapter
Before you can use the devolo Magic 2 LAN triple
in your devolo Magic network, first you have to
connect it to your existing devolo Magic adapters
as a network. This is accomplished by using a
shared password.
CAUTION! Tripping hazard
Lay the cable in a barrier-free manner and
ensure that the electrical socket and the
connected network devices are easily
accessible
Connect the devolo Magic 2 LAN triple to the
1
network connection of your computer or ano-
ther network device using a network cable.
Plug the devolo Magic 2 LAN triple into an
2
available power socket. As soon as the LED flas-
hes white at regular intervals of 0.5 seconds,
the adapter is ready to operate but not yet
integrated into a devolo Magic network (see
Chapter 2.3.1 Reading the indicator light).
Within 3 minutes, press the PLC/reset button
3
on a devolo Magic adapter in your existing
devolo Magic network for approximately 1 sec.
devolo Magic 2 LAN triple
Initial use 20