Devolo Magic 2 LAN triple Handbuch Seite 51

13 Introduction
After a short time, the flashing LED beco-
mes a steady white light. The devolo Magic
adapter has been successfully integrated
into your existing devolo Magic network.
For each pairing operation, only one addi-
tional devolo Magic adapter can be added
at a time.
You can find detailed information about in-
stalling devolo Magic adapters in Chapter
3.4 Connecting devolo Magic adapters.
Resetting a devolo Magic adapter or removing
it from a devolo Magic network
To remove a devolo Magic adapter from your
1
devolo Magic network and successfully restore
its entire configuration to the factory default
settings, press and hold the reset button longer
than 10 seconds.
Wait until the LED flashes white and then dis-
2
connect the devolo Magic adapter from the
mains supply.
Keep in mind that all settings that have al-
ready been made will be lost!
devolo Magic 2 LAN triple