This user manual contains important information about your combination smoke and carbon monoxide alarm's
operation. To ensure proper use and trouble-free operation, please read this manual carefully and store it in a safe
place for future reference.
Introduction
A1 X Sense Pro combination smoke and carbon monoxide a arms conform with regu atory requirements, including
EN14604 and EN50291 Standards and are designed to detect both smoke and carbon monoxide.
This unit adopts photoelectric technology to detect smoke which is general y more sensitive than ionization technology. t
is effective at detecting arge particles, which tend to be produced in greater amounts by smoldering fires. These types of
fires may smolder for hours before bursting into flame. Sources of these fires may include cigarettes burning in couches or
bedding.
Carbon monoxide (CO)is odorless, tasteless and invisible
unit can detect increased evels of carbon monoxide ear y, protecting your fami y from the dangers of carbon monoxide.
• The installation of the apparatus should not be used asa substitute for proper installation, use and maintenance of
fuel-burning appliances including appropriate ventilation and exhaust systems.
• This apparatus is to be instal ed by a competent person.
• t is not tested for use in a caravan or boat.
NOTE: For maximum protection,
use smoke and CO alarms on each level and in every
bedroom of your home.
NEVER
IGNORE
THE
SOUND
OF THE ALARM!
Determining what type of alarm has sounded is easy with your X Sense Pro combination smoke and carbon monoxide
alarm. The buzzer will inform you of the type of situation occurring.
Package Contents
x Alarm
Unit
x Mounting Bracket
3 x Screws
3 x Anchor Plugs
I x User Manua
it's a silent kil ereUsing electrochemical sensing technology, this
• 02 •
Technical Specifications
Power Supp y
Sensor Type
Product Lifespan
Safety Standard
CO Sensitivity
Operating Temperature
Operating Reative Humidity
Alarm
Loudness
Silence
Duration
NOTES:
1.Battery life iscalculatedon the current ratingsin thestandby modewith weeklytestings.If its operation modechangesto an
alarming condition, the battery life will be decreased accordingly.
2. Thisalarm functionsbetween4—380C (40— 7OOOF). Prolongedexposureto lower or higher temperaturescan reducebattery life and
affect deviceperformance.Wedo not recommendoperating the devicebeyondits temperaturerange.
Product
Overview
! CAUTION
THIS SMOKE AND
CO ALARM
IS DESIGNED
FOR INDOOR
KNOCK
OR DROP THE ALARM.
DO NOT OPEN OR TAMPER
10-year sea ed lithium battery
Smoke:
Photoelectric
CO: Electrochemica
10 years
EN 146042005
and
EN 50291-1:2018
30 ppm:>
120 minutes
50 ppm: 60 90 minutes
100 ppm:
10-40
minutes
300 ppm: < 3 minutes
4-380C (40
1OOOF)
RH (non-condensing)
85 dB at 3 m (10 ft) @ 3.2 ± 0.3 kHz pu sing a arm
9 minutes
USE ONLY. DO NOT EXPOSE TO RAIN OR MOISTURE.
WITH THE ALARM
AS THIS COULD
CAUSE MALFUNCTION.
• 03 •
DO NOT